EUDR for wooden beehive and hive frame manufacturers
Wooden hive bodies, frames and bottom boards fall to CN ex 4421, inside EUDR's wood scope. Wax foundation is beeswax, not a regulated commodity at all.
On this page
- 01Which hive parts are actually in scope
- 02Wax foundation sits outside the regulation entirely
- 03Complete hive kits: wood with the foundation already fitted
- 04Who is the operator here
- 05Second-hand hives and the 2026 used-goods carve-out
- 06The deadline is settled by the Timber Regulation, not by business size
- 07The 2020 cut-off, geolocation and country risk
- 08FAQ
Yes, for the wood. Hive bodies, supers, frames, bottom boards and roofs are assembled wooden articles with no dedicated customs heading of their own, so they fall to CN ex 4421 — "other articles of wood" — inside Annex I's wood range of Regulation (EU) 2023/1115. Wax foundation is a different story: beeswax is not one of the regulation's seven covered commodities, so a sheet of foundation sits outside the EUDR regardless of what it is fitted into.
Which hive parts are actually in scope
A Langstroth or National hive is normally sold, or built, from several wooden parts: the brood box and super bodies, the frames that hang inside them, the bottom board, the crown board and the roof. None of these has its own line in the Combined Nomenclature. Heading 4414 — which covers wooden frames — sounds like the obvious match for hive frames, but that heading is written for picture, photograph and mirror frames; the Combined Nomenclature's own wording for 4414 names those three uses specifically, and a hive frame is not a decorative frame in that sense. With no heading written for beekeeping equipment, hive bodies, frames, boards and roofs all land in heading 4421, the residual "other articles of wood" entry that catches wooden articles not named anywhere else in Chapter 44 — the same basket heading used for wooden chicken coops, dog kennels and similar wooden enclosures. A US customs ruling on imported wooden beehives placed them at the equivalent "other articles of wood" line in the US tariff schedule, for exactly this reason; the EU's Combined Nomenclature follows the same six-digit international structure for heading 4421, though the point has not, as far as we can establish, been tested by a published EU Binding Tariff Information decision for beehives specifically. If you import or manufacture at volume, a BTI request to your national customs authority settles the question for your own product with legal certainty; this article sets out the reasoning, not a ruling.
Annex I lists the heading as "ex 4421" — other articles of wood — and the "ex" marks that only genuinely wood articles under that heading are reached, not everything that might be filed there on a customs declaration. A wooden hive body or frame, made of pine, cedar or any other timber, meets that description squarely.
| Hive component | Material | CN heading | EUDR relevant? |
|---|---|---|---|
| Brood box, super, bottom board, roof | Wood | ex 4421 | Yes |
| Frames (empty, no foundation fitted) | Wood | ex 4421 | Yes |
| Wax foundation sheets | Beeswax | Not an Annex I commodity | No |
| Wire, eyelets, queen excluders | Metal/plastic | Not wood | No |
| Complete hive kit, foundation already fitted | Mostly wood, by value and bulk | ex 4421 (see below) | Yes, for the kit |
Wax foundation sits outside the regulation entirely
The EUDR regulates seven commodities: cattle, cocoa, coffee, oil palm, rubber, soya and wood. Beeswax is not among them, and no amendment to date has added it. That means a sheet of wax foundation — however it is milled, pressed or wired — carries no EUDR obligation on its own, whoever sells it and wherever the wax originated. This is a narrower exemption than it sounds: it is not that foundation is exempted from an obligation that would otherwise apply, it is that the product category the obligation runs on does not reach it at all. A foundation manufacturer selling wax sheets as a standalone product has no due diligence statement to file for them, full stop.
Complete hive kits: wood with the foundation already fitted
Most retail hive kits are sold as a single product: boxes, frames, a roof and usually a few sheets of foundation already pressed into the frames. Customs classification of a mixed product like this turns on essential character — which material gives the article its character as a product — not on counting every component separately. By weight, bulk and manufacturing cost, a hive kit is overwhelmingly wood; the wax foundation inside it is a minor, consumable inclusion, not the thing a buyer is purchasing a hive kit for. On that basis a complete kit is reasonably treated the same way as an empty hive — CN ex 4421, in scope for the wood — rather than reclassified as a wax product because foundation happens to be included. This is a classification judgement, not a settled precedent, so anyone selling kits at commercial volume should confirm it with a BTI rather than assume it, exactly as the position on wooden tool handles sold with or without a fitted head depends on which article is actually classified where.
Who is the operator here
- A joinery, sawmill or hive manufacturer selling finished boxes, frames or complete kits into the EU market is placing a CN ex 4421 product on the market. It is the first operator and files the due diligence statement, for the wood components only.
- A beekeeping supplies importer bringing in flat-packed hive parts or frames from outside the EU is placing the same product on the market at the point of import, and carries the same obligation.
- A beekeeping shop or beekeeper buying finished hives from an EU manufacturer that has already filed is a downstream user for that purchase: no fresh statement, just the reference number the manufacturer provides.
- A foundation-only supplier has no EUDR filing to make for that product, whatever else it sells alongside it.
Second-hand hives and the 2026 used-goods carve-out
Beekeeping has an active secondhand market: retiring beekeepers sell on boxes, supers and frames that are often decades old. Commission Delegated Regulation (EU) 2026/2102, which took effect on 18 September 2026, removed used and second-hand goods from the EUDR's product perimeter generally — a change covered in full in what the 2026/2102 delegated act changed in Annex I. A dealer or beekeeping association reselling genuinely used wooden hives, as used goods rather than as new stock, is dealing outside the regulation's product scope for that transaction. New hive bodies, frames or kits remain fully in scope regardless of how the finished product will eventually be used.
The deadline is settled by the Timber Regulation, not by business size
Regulation (EU) 2025/2650 set two main application dates: 30 December 2026 for large and medium operators and traders, and for any micro or small operator whose products were already covered by the EU Timber Regulation; 30 June 2027 for other micro and small operators. Wood, including CN ex 4421 articles, sat inside the Timber Regulation's scope before it was repealed and folded into the EUDR, for the reasons set out in furniture and timber importers after the Timber Regulation repeal. That puts every hive, frame and bottom board manufacturer on the 30 December 2026 date, whatever the size of the business — there is no small-operator extension available on this product. The later 30 December 2027 date introduced for products newly added by Delegated Regulation (EU) 2026/2102 does not apply here either: 4421 has been in Annex I's wood range since the regulation was first adopted in 2023, and the 2026 act added soluble coffee, frozen cattle tongues and specific palm oil derivatives, not wood headings. See which application date applies to your business for the full picture.
The 2020 cut-off, geolocation and country risk
Wood only counts as deforestation-free if it was harvested from land that has not been deforested or degraded since 31 December 2020. For a hive manufacturer, that tests against when the timber was felled, not when the boxes were cut, planed or assembled — pine and cedar stock is frequently seasoned for months before it reaches a hive workshop. The due diligence statement needs geolocation of the harvest plot to the usual thresholds in geolocation requirements: polygons, points and the 4-hectare rule, plus a country-risk classification for wherever that timber actually grew. Pine and cedar for hive stock are commonly sourced from a different country than the one a hive workshop or distributor trades out of, so check the country of harvest directly rather than assuming it matches the country on your supplier's invoice.
FAQ
Are wooden beehives covered by the EUDR? Yes. Hive bodies, supers, frames, bottom boards and roofs are wooden articles with no dedicated customs heading, so they fall to CN ex 4421, inside Annex I's wood range.
Is wax foundation covered? No. Beeswax is not one of the EUDR's seven regulated commodities — cattle, cocoa, coffee, oil palm, rubber, soya and wood — so foundation sheets sit outside the regulation entirely, whoever sells them.
What about a complete hive kit with foundation already fitted? Treat it the same as an empty hive. The wood gives the kit its essential character for classification purposes; the foundation inside it is a minor inclusion, not grounds to reclassify the whole kit as a wax product. Confirm with a BTI if you sell kits at volume.
Do micro and small hive manufacturers get until 30 June 2027? No. Wood was already covered by the EU Timber Regulation, so the small-operator extension does not apply here. Every hive, frame and bottom board manufacturer faces 30 December 2026, regardless of size.
I buy finished hives from an EU manufacturer who already filed a statement. What do I need to do? Keep the reference number they give you. You are a downstream user for that purchase and do not file your own statement.
Can I sell secondhand wooden hives without a due diligence statement? Generally yes, since September 2026. Commission Delegated Regulation (EU) 2026/2102 took used and second-hand goods out of the EUDR's product perimeter. New hive bodies, frames or kits remain fully in scope.
Does the species of timber matter? Not to whether the product is in scope — that turns on the CN heading, not the species. Species and country of harvest do feed into the country-risk classification and the geolocation record you need to hold.
Were beehives and hive frames newly added to Annex I by the 2026 amendment? No. CN 4421 has been part of Annex I's wood range since Regulation (EU) 2023/1115 was first adopted. The 2026/2102 delegated act added different products — soluble coffee, frozen cattle tongues and certain palm oil derivatives — and left the wood headings untouched.
If you are not sure whether what you sell is the hive, the frame, the foundation or a mix of all three, run the free checker — it works through your actual product line and tells you which obligations apply and by when.
General information about Regulation (EU) 2023/1115 as amended, not legal advice. EUDR scope is determined by customs (CN) code — confirm your own classifications before acting on this. Checked against primary sources on .
Frequently asked
01Are wooden beehives covered by the EUDR?
Yes. Hive bodies, supers, frames, bottom boards and roofs are wooden articles with no dedicated customs heading, so they fall to CN ex 4421, inside Annex I's wood range.
02Is wax foundation covered?
No. Beeswax is not one of the EUDR's seven regulated commodities — cattle, cocoa, coffee, oil palm, rubber, soya and wood — so foundation sheets sit outside the regulation entirely, whoever sells them.
03What about a complete hive kit with foundation already fitted?
Treat it the same as an empty hive. The wood gives the kit its essential character for classification purposes; the foundation inside it is a minor inclusion, not grounds to reclassify the whole kit as a wax product. Confirm with a BTI if you sell kits at volume.
04Do micro and small hive manufacturers get until 30 June 2027?
No. Wood was already covered by the EU Timber Regulation, so the small-operator extension does not apply here. Every hive, frame and bottom board manufacturer faces 30 December 2026, regardless of size.
05I buy finished hives from an EU manufacturer who already filed a statement. What do I need to do?
Keep the reference number they give you. You are a downstream user for that purchase and do not file your own statement.
06Can I sell secondhand wooden hives without a due diligence statement?
Generally yes, since September 2026. Commission Delegated Regulation (EU) 2026/2102 took used and second-hand goods out of the EUDR's product perimeter. New hive bodies, frames or kits remain fully in scope.
07Does the species of timber matter?
Not to whether the product is in scope — that turns on the CN heading, not the species. Species and country of harvest do feed into the country-risk classification and the geolocation record you need to hold.
08Were beehives and hive frames newly added to Annex I by the 2026 amendment?
No. CN 4421 has been part of Annex I's wood range since Regulation (EU) 2023/1115 was first adopted. The 2026/2102 delegated act added different products — soluble coffee, frozen cattle tongues and certain palm oil derivatives — and left the wood headings untouched.
Sources
- [1]Regulation (EU) 2023/1115 (EUDR), Annex I
- [2]Consolidated text of Regulation (EU) 2023/1115, as amended (18 September 2026)
- [3]Regulation (EU) 2025/2650 amending application dates and obligations
- [4]Commission Delegated Regulation (EU) 2026/2102 amending Annex I
- [5]European Commission: Combined Nomenclature and tariff classification of goods