EUDR for haberdashery suppliers: buttons, bands, trims
Rubber bands lost their EUDR status in September 2026, wooden buttons never had one, and most fibre trims were never listed at all. What's actually in scope.
On this page
- 01Why rubber bands are no longer an EUDR question
- 02Elastic thread and cord: a narrower exception
- 03A wooden button isn't a "wood" product under EUDR
- 04Natural fibre trims: ribbon, braid, bias binding, lace
- 05Where this sector can still get caught
- 06A worked example
- 07Deadlines, for the exception cases
- 08What to check before assuming your range is entirely out of scope
Not for most of what you sell. Finished wooden buttons, rubber bands and natural fibre trims generally sit outside Annex I to the EUDR: buttons have their own customs heading, rubber bands lost their Annex I entry in September 2026, and ribbon, braid and other textile trims were never listed at all. The exception is any raw wood or raw natural rubber latex you buy yourself to turn into these components.
Why rubber bands are no longer an EUDR question
Rubber bands — the pasted-joint or seamless loops sold for office, kitchen and craft use — are classified under CN heading 4016.99, the "other articles of vulcanised rubber, not elsewhere specified in Chapter 40" entry. Until September 2026, a version of that heading, written as ex 4016 in Annex I to Regulation (EU) 2023/1115, meant a rubber band made from natural rubber latex carried a due diligence obligation like any other Annex I product.
Commission Delegated Regulation (EU) 2026/2102 deleted that entry outright, along with the conveyor and transmission belt entry under ex 4010, with effect from 18 September 2026 — the day after publication in the Official Journal. The Commission's own reasoning was that both headings "contain low amounts of natural rubber and therefore their contribution to deforestation is limited." Unlike the products the same regulation added to Annex I, which run on a later 30 December 2027 date, a deletion applies from the date the regulation took effect. There is no transition period and no size exemption to check: no rubber band carries an EUDR duty now, whatever it is made from or who sells it.
This mirrors what happened to rubber erasers in the same instrument, covered in our stationery guide — a different product under the same deleted heading, with the same result.
Elastic thread and cord: a narrower exception
Not every elastic product in a haberdashery range follows rubber bands out of scope. CN heading 4007, vulcanised rubber thread and cord, is a different entry from 4016 and was not touched by the September 2026 deletion. If you sell genuine rubber-cored elastic thread or cord — the kind used in smocking, shirring or some corsetry work — made from natural rubber latex, that product remains an Annex I relevant product under ex 4007, on the same natural-versus-synthetic test that decides whether a rubber glove is in scope.
In practice this rarely bites. Most sewing elastic sold today is a textile-covered synthetic construction — a core of spandex or a rubber-free elastomer wrapped or woven with cotton, nylon or polyester — which is a textile product, not a Chapter 40 rubber one, and was never an Annex I commodity on either count. The distinction only matters if you specifically stock or manufacture elastic thread described as natural rubber latex, which is now a minority product in most ranges.
A wooden button isn't a "wood" product under EUDR
Scope under the EUDR runs on customs classification, not on what something is made of. Wooden buttons are classified under CN 9606.29, inside the dedicated buttons heading in Chapter 96 — not under any of the wood headings in Chapter 44 that Annex I's wood entry actually lists. The customs tariff's General Rules for the Interpretation of the Nomenclature give a heading that names an article specifically priority over one that only describes the material it is made from, which is why a wooden button, like a finished wooden toy, escapes the wood chapter that its raw material does not. The same reasoning applies whether the button is turned from boxwood, coconut shell, or any other timber species — it is a button first, as far as the tariff is concerned.
This does not extend to every finished item a haberdashery business sells. A wooden toggle fastener classified as a button follows this rule; a wooden embroidery hoop, picture frame or storage box sold as its own product is a different CN heading again and needs checking on its own facts as a loose wood item, separately from the button question.
Natural fibre trims: ribbon, braid, bias binding, lace
Ribbon, braid, bias binding, rickrack, lace and cord made from cotton, jute, viscose, silk or other natural fibres sit in the textile chapters of the Combined Nomenclature — broadly Chapters 50 to 63, depending on construction — and none of those chapters appears anywhere in Annex I, because none of the fibres they're made from is one of the seven commodities the EUDR regulates: cattle, cocoa, coffee, oil palm, rubber, soya and wood. Our guide to jute, hessian and coir covers the same point for sacking and matting — a natural plant fibre is not automatically an EUDR commodity, and trims made from jute, cotton or similar fibres were never on the list in the first place, before or after the 2025 and 2026 amendments.
| Component | Typical CN heading | In Annex I? |
|---|---|---|
| Rubber bands (elastic loops) | 4016.99 | No — entry deleted 18 September 2026 |
| Elastic thread or cord, natural rubber latex | ex 4007 | Yes, if genuinely natural rubber |
| Elastic thread or cord, synthetic/textile-covered | textile chapters | No — never an Annex I commodity |
| Wooden buttons (finished) | 9606.29 | No — buttons heading, not Chapter 44 |
| Raw wood dowel, blanks or discs for turning buttons | 4403–4421 | Yes |
| Cotton, jute or viscose ribbon, braid, bias binding | Chapters 50–63 | No — fibre not an Annex I commodity |
| Leather or suede trim and piping | 4101, 4104, 4107 and related | No — removed by Delegated Regulation (EU) 2026/2102 |
Where this sector can still get caught
The exemption attaches to the finished button, band or trim, not to every raw material that goes into making one. Three situations bring a haberdashery or craft supplier into scope:
- Importing raw wood to turn your own buttons. A manufacturer buying rough timber, dowel or discs from outside the EU to cut and polish into buttons is placing a wood relevant product on the market under CN 4403–4421, and carries a due diligence obligation for that wood, even though the finished buttons that come out the other end do not.
- Importing raw natural rubber latex to extrude elastic thread or cord. If you make your own natural rubber elastic cord rather than buying it in, the natural rubber input (CN 4001) is the commodity, and the finished cord stays in scope under
ex 4007regardless. - A mixed kit or hamper with a genuinely regulated item inside it. A craft bundle that pairs out-of-scope ribbon and buttons with, say, a cocoa-based dye or a wooden embroidery frame sold as a separate product brings that one component into scope on its own terms. Scope follows the CN code of each component in a mixed product, not the bundle as a whole.
A worked example
Take a UK haberdashery wholesaler stocking rubber bands, wooden toggle buttons, cotton bias binding and a small range of natural rubber shirring elastic for corsetry suppliers. The rubber bands need no paperwork at all, following the September 2026 deletion. The wooden buttons need none either, because CN 9606 was never an Annex I heading. The cotton bias binding was never in scope on any date. Only the natural rubber shirring elastic, if it is genuinely latex-cored rather than a synthetic-core textile product, carries a live due diligence obligation — and even then, only for whoever first places it on the EU market, not for every stockist downstream of that point: since Regulation (EU) 2025/2650 concentrated the filing duty on whoever first places a product on the EU market, a wholesaler buying that elastic from an EU-based manufacturer holds the manufacturer's reference number rather than filing a statement of its own.
Deadlines, for the exception cases
These dates only matter if you import raw wood or raw natural rubber latex yourself, or manufacture genuine natural-rubber elastic thread or cord. They have no bearing on finished buttons, rubber bands or textile trims, which carry no EUDR obligation at any date.
| Business size | Deadline |
|---|---|
| Large or medium operator or trader | 30 December 2026 |
| Micro or small operator, product already under the EU Timber Regulation (raw wood) | 30 December 2026 |
| Micro or small operator, otherwise (raw natural rubber inputs) | 30 June 2027 |
Size bands follow the thresholds in Directive 2013/34/EU: broadly micro up to 10 staff and €900,000 turnover, small up to 50 staff and €10 million turnover, medium up to 250 staff and €50 million turnover, large above that. Our full deadline guide covers how group structure and product history interact with these bands.
What to check before assuming your range is entirely out of scope
- Confirm the CN code your supplier or customs agent actually declares for each product line — a rubber band, a button and a length of trim are each a different heading, and only the raw-material imports among them are still live.
- Separate genuine natural rubber latex elastic thread or cord from the far more common synthetic, textile-covered sewing elastic. Only the former sits under
ex 4007. - If you manufacture your own wooden buttons or natural rubber elastic, check whether you are the one importing the raw wood or latex, or whether an EU-based supplier already carries that obligation for you.
- Do not assume a natural plant fibre trim is regulated because it sounds like the kind of material a deforestation law would cover. Scope runs on the seven named commodities and their CN codes, not on general materials.
Check what the EUDR actually requires of your specific product range rather than guessing from a material description, particularly if any part of your stock is manufactured in-house from raw wood or raw natural rubber.
General information about Regulation (EU) 2023/1115 as amended, not legal advice. EUDR scope is determined by customs (CN) code — confirm your own classifications before acting on this. Checked against primary sources on .
Frequently asked
01Does the EUDR apply to rubber bands?
No, not since 18 September 2026. The Annex I entry that could have caught rubber bands, ex 4016, was deleted by Commission Delegated Regulation (EU) 2026/2102. No rubber band carries an EUDR due diligence obligation now, whatever it is made from.
02Are wooden buttons covered by the EUDR?
No. Finished buttons are classified under CN 9606.29, inside the dedicated buttons heading in Chapter 96, not under any of the wood headings in Chapter 44 that Annex I lists. A specific-article heading takes priority over a material-based one, the same rule that keeps finished wooden toys and pencils out of scope.
03Is ribbon, braid or bias binding in scope if it's made from a natural fibre?
No. Cotton, jute, viscose and most other natural fibre trims sit in the textile chapters of the customs tariff, and none of those fibres is one of the seven commodities the EUDR regulates — cattle, cocoa, coffee, oil palm, rubber, soya and wood. They were never listed in Annex I, before or after the recent amendments.
04What about elastic thread or cord rather than rubber bands?
It depends what it's made from. Genuine vulcanised natural rubber latex thread or cord, used in smocking or shirring, is classified under ex 4007 and remains an Annex I product — the September 2026 deletion did not touch that heading. Most sewing elastic sold today is a synthetic, textile-covered construction, which was never in scope either way.
05If I import raw wood to turn my own buttons, do I have an obligation?
Yes, for the wood. Rough timber, dowel or discs bought from outside the EU to cut into buttons are a wood relevant product under CN 4403–4421, and whoever first places that wood on the EU market is the operator with a due diligence obligation, even though the finished buttons carry none.
06Does country of origin matter for haberdashery trims?
Only once a product is already an Annex I commodity. Country benchmarking under the EUDR sets a risk rating for the seven regulated commodities; it has no bearing on a fibre or finished article, like a button or a textile trim, that the regulation does not list in the first place.
07Were leather trims and piping affected by the 2026 changes?
Yes, separately from the rubber and button points here. Cattle hides, skins and leather were removed from Annex I by the same Delegated Regulation (EU) 2026/2102, so leather and suede trim and piping carry no EUDR obligation since that regulation took effect.
08I sell mixed craft kits with buttons, ribbon and a wooden frame. Is the whole kit in scope?
Only whichever component is genuinely an Annex I product, on its own CN code. A wooden embroidery frame or box sold as a separate item can be in scope on its own facts even where the buttons and ribbon bundled with it are not; scope follows each component, not the kit as a whole.
Sources
- [1]Regulation (EU) 2023/1115 on deforestation-free products, Annex I (EUR-Lex)
- [2]Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 (EUR-Lex)
- [3]Commission Delegated Regulation (EU) 2026/2102 amending Annex I product scope (EUR-Lex)
- [4]European Commission — Deforestation-free products: application dates and product scope
- [5]World Customs Organization — Harmonized System Explanatory Notes, heading 96.06 (buttons)