EUDR · 2023/111530.12.2026 — 42 days
EUDRcheck

EUDR for coffin and casket manufacturers: what's in scope

Wood and fibreboard coffins sit under CN 4421, inside EUDR's wood scope. Willow, wicker, bamboo and cardboard coffins have a real case for sitting outside it.

9 min read5 primary sources
On this page
  1. 01The CN code that actually governs
  2. 02Which materials actually bring you into scope
  3. 03Who files: manufacturer, importer or funeral director
  4. 04Does the small-business extension help here
  5. 05The 2020 cut-off and geolocation
  6. 06Before your next order
  7. 07FAQ

Yes, for solid wood or wood-fibreboard coffins. CN 4421, "other articles of wood," sits in Annex I of Regulation (EU) 2023/1115 as "ex 4421" — reached only where the product is actually wood. Willow, wicker and genuine bamboo coffins have a real case for sitting outside that scope; a cardboard one depends on whether the board is virgin or recycled.

The CN code that actually governs

Coffins have their own customs subheading. Commission Implementing Regulation (EU) 2022/859 split heading 4421 to create CN 4421 20, specifically for coffins, divided into 4421 20 10 (of fibreboard) and 4421 20 90 (other). Before that split, coffins were classified under the residual 4421 99 lines. Either way, a wooden or wood-fibreboard coffin sits inside the four-digit heading 4421 — and Annex I lists that heading as "ex 4421," meaning it catches the product only to the extent it is genuinely made of wood, the same qualifier that applies to every other wood heading from 4401 through 4421.

There is a naming trap worth clearing up first. CN heading 4420 — a different heading, also in Annex I's wood row — covers "wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery" and similar small wooden articles. That "casket" is a jewellery box, not a funeral casket. American English uses "casket" for a coffin; the Combined Nomenclature does not. A funeral coffin or casket, whatever you call it in trade, is classified under 4421, not 4420.

Wooden cremation urns follow the same path. They are not named separately in the Combined Nomenclature and are generally classified under 4421 as well, so the scope answer for an urn is the same as for a coffin — in scope if it is genuinely wood, out if it is not.

Which materials actually bring you into scope

Because 4421 is an "ex" entry, the material inside the product decides the answer, not the trade description on the invoice.

  • Solid wood (oak, pine, poplar, chipboard veneer). In scope. This is the ordinary case: a timber coffin built from sawn boards or veneered chipboard.
  • Wood fibreboard (MDF-type coffins, often veneered or painted to resemble solid timber). In scope. CN 4421 20 10 names fibreboard coffins specifically, and fibreboard is wood for this purpose regardless of finish.
  • Willow or wicker (woven, unlacquered or lacquered). Genuinely unsettled, and the better argument runs in the coffin's favour. Woven willow articles are ordinarily classified as basketwork or wickerwork under CN 4602, a heading that does not appear anywhere in Annex I's wood list — unlike 4421, there is no "ex 4602" entry to catch it. No Commission guidance has addressed funeral products specifically, so if your whole sourcing model turns on this, get your actual product's classification confirmed rather than assume it from this description.
  • Bamboo. Generally outside scope. The Commission's Annex I delegated act treats bamboo as a non-wood plant material rather than timber, the same basis on which bamboo furniture and homeware sits outside the wood commodity. A coffin made entirely from bamboo carries no EUDR duty on that basis — but a bamboo-veneered coffin with a timber or fibreboard carcass still has a wood component that needs assessing on its own terms.
  • Cardboard or corrugated board. Depends on the board. Annex I's paper and pulp entry covers Chapters 47 and 48 "with the exception of bamboo-based and recovered (waste and scrap) products" — the regulation's own wording. A coffin made from virgin paperboard pulp is in scope under that entry. One made from genuinely recycled or recovered corrugated board is excluded, on the same waste test that applies to recycled wood, rubber and leather generally — "recycled" on the box is a claim to verify with your board supplier, not a fact to assume.
  • Metal, wool or cotton shroud linings, fabric drapes, synthetic trim. Outside the EUDR entirely. The regulation reaches only seven commodities — cattle, cocoa, coffee, oil palm, rubber, soya and wood — and none of these materials is any of them, whatever CN code the finished coffin fitting carries.
Coffin material CN heading In Annex I's wood scope?
Solid wood (oak, pine, poplar, etc.) 4421 20 90 Yes
Wood fibreboard (MDF-type, veneered or painted) 4421 20 10 Yes
Willow or wicker, woven Usually 4602 (basketwork) Likely no — unsettled, confirm your classification
Bamboo, unmixed 4421-adjacent, but bamboo is non-wood No
Virgin paperboard (cardboard) Chapter 48 Yes
Recycled or recovered corrugated board Chapter 48, named exclusion No
Metal, wool, cotton, synthetic fittings and linings Various, none a relevant commodity No

A single coffin design sold in several material options is not one scope answer — it is as many answers as there are material lines, assessed separately, the same principle that applies to any mixed-material product range.

Who files: manufacturer, importer or funeral director

Since Regulation (EU) 2025/2650, the due diligence statement is filed once, by whichever business first places the product on the EU market; everyone further down the chain keeps that statement's reference number rather than filing its own. What downstream operators and traders do instead of filing sets out the record-keeping that replaces a fresh statement.

Three positions turn up in this trade, each with a different answer:

  • A coffin manufacturer importing raw timber, veneer or fibreboard panels from outside the EU is the operator for that import, with full geolocation and due diligence duties on the wood itself, regardless of what it later builds from it.
  • A manufacturer or wholesaler buying finished coffins from an EU-based maker or importer is downstream — no fresh statement, just the reference number on file.
  • A funeral director, funeral products wholesaler or crematorium buying finished coffins directly from outside the EU is the operator itself at the point of import. This is the position that catches people out: eco-coffin ranges, low-cost timber coffins and fibreboard caskets are commonly manufactured in Vietnam, China or Eastern Europe and sold directly to UK and EU funeral businesses, who think of themselves as a service business rather than an importer. If that describes your supply route, you hold the due diligence duty, not your overseas supplier.

Does the small-business extension help here

Yes, and this is where coffins differ from most other wood products on this site. Regulation (EU) No 995/2010, the old EU Timber Regulation, listed its covered products by CN code in its own Annex: roundwood and sawn timber (4401, 4403, 4406–4409), panels (4410–4413), picture frames (4414), packing cases and casks (4415, 4416), builders' joinery (4418), pulp and paper (Chapters 47–48), and specific wooden furniture and prefabricated building codes (9403, 9406 00 20). CN 4421 does not appear in that list at all.

Because coffins and caskets were never within the old Timber Regulation's scope, Regulation (EU) 2025/2650's size-based deferral applies to them in full:

Who you are Application date
Large or medium operator or trader, any size of business 30 December 2026
Micro or small operator 30 June 2027

Delegated Regulation (EU) 2026/2102's later date of 30 December 2027, for products newly added to Annex I, does not apply either — CN 4421 has been in Annex I since Regulation (EU) 2023/1115 was first adopted, so nothing about the 2026 amendment moved coffins onto that later timetable.

The 2020 cut-off and geolocation

Wood only counts as deforestation-free if it was harvested from land that was not deforested or degraded after 31 December 2020. For a coffin manufacturer, that tests against when the tree was felled, not when the board was milled, veneered or assembled into a finished coffin.

The due diligence statement needs geolocation for the harvest plot and a country-risk classification for wherever the timber was actually grown, following the usual approach set out in geolocation requirements: polygons, points and the 4-hectare rule. For coffins specifically, this is rarely a single country: a fibreboard coffin assembled in Vietnam might use MDF pressed there from softwood pulp sourced from two or three countries, with a veneer sourced from a fourth. The country that matters for risk classification is wherever each contributing timber was harvested, not the country the finished coffin ships from.

Before your next order

  • Classify every coffin line by what it is actually made of, not by what the catalogue calls it — "eco coffin" covers willow, bamboo, cardboard and fibreboard products with very different scope answers.
  • If you import finished coffins directly from outside the EU, work out now whether that makes you the operator — many funeral businesses do not realise it does.
  • Get a formal classification check on any woven willow or wicker range before relying on it sitting outside scope; the basketwork argument is reasonable but untested for this specific product.
  • Ask cardboard coffin suppliers for evidence of genuinely recycled content, not just a marketing claim.
  • Confirm which of the two 2026/2027 dates applies to your business size before assuming either one.

Check what the EUDR requires of your specific coffin or casket range — the answer turns on the material and your position in the supply chain, not on the trade name of the product.

FAQ

Are wooden coffins covered by the EUDR? Yes. Wood and wood-fibreboard coffins are classified under CN 4421 20, inside heading 4421, which Annex I of Regulation (EU) 2023/1115 lists as "ex 4421" — covered because the product is genuinely wood.

What about the word "casket" in Annex I? That is a different product. CN 4420's reference to "caskets" means small decorative boxes for jewellery or cutlery, not funeral caskets. Funeral coffins and caskets are classified under 4421, not 4420.

Are willow or wicker coffins in scope? Likely not, but it is genuinely unsettled. Woven willow articles are usually classified as basketwork under CN 4602, which does not appear anywhere in Annex I. No Commission guidance has addressed funeral products specifically, so confirm the actual classification of your product rather than rely on this as a settled answer.

Are bamboo coffins covered? Generally no. Bamboo is treated as a non-wood plant material under the EUDR, the same basis used for bamboo furniture and kitchenware. A coffin with any wood or fibreboard component still needs that component assessed separately.

Are cardboard coffins covered? Only if the board is virgin paperboard. Annex I's paper and pulp entry excludes recovered (recycled) and bamboo-based paper products by name, so a genuinely recycled-content cardboard coffin falls outside it.

Do small, independent coffin makers get until June 2027? Yes. CN 4421 was never within the old EU Timber Regulation's product list, which is the condition Regulation (EU) 2025/2650 attaches to the later date, so micro and small coffin and casket manufacturers and importers get until 30 June 2027.

Who holds the due diligence duty — the manufacturer or the funeral director? Whoever first places the coffin on the EU market. That is usually the manufacturer or importer, but a funeral director or wholesaler who imports finished coffins directly from outside the EU is the operator for that import, not a downstream buyer.

Are wooden cremation urns treated the same way as coffins? Yes. Urns are not named separately in the Combined Nomenclature and are generally classified under the same CN 4421 heading, so the scope answer follows the material in the same way it does for coffins.

General information about Regulation (EU) 2023/1115 as amended, not legal advice. EUDR scope is determined by customs (CN) code — confirm your own classifications before acting on this. Checked against primary sources on .

Questions

Frequently asked

01Are wooden coffins covered by the EUDR?

Yes. Wood and wood-fibreboard coffins are classified under CN 4421 20, inside heading 4421, which Annex I of Regulation (EU) 2023/1115 lists as "ex 4421" — covered because the product is genuinely wood.

02What about the word "casket" in Annex I?

That is a different product. CN 4420's reference to "caskets" means small decorative boxes for jewellery or cutlery, not funeral caskets. Funeral coffins and caskets are classified under 4421, not 4420.

03Are willow or wicker coffins in scope?

Likely not, but it is genuinely unsettled. Woven willow articles are usually classified as basketwork under CN 4602, which does not appear anywhere in Annex I. No Commission guidance has addressed funeral products specifically, so confirm the actual classification of your product rather than rely on this as a settled answer.

04Are bamboo coffins covered?

Generally no. Bamboo is treated as a non-wood plant material under the EUDR, the same basis used for bamboo furniture and kitchenware. A coffin with any wood or fibreboard component still needs that component assessed separately.

05Are cardboard coffins covered?

Only if the board is virgin paperboard. Annex I's paper and pulp entry excludes recovered (recycled) and bamboo-based paper products by name, so a genuinely recycled-content cardboard coffin falls outside it.

06Do small, independent coffin makers get until June 2027?

Yes. CN 4421 was never within the old EU Timber Regulation's product list, which is the condition Regulation (EU) 2025/2650 attaches to the later date, so micro and small coffin and casket manufacturers and importers get until 30 June 2027.

07Who holds the due diligence duty — the manufacturer or the funeral director?

Whoever first places the coffin on the EU market. That is usually the manufacturer or importer, but a funeral director or wholesaler who imports finished coffins directly from outside the EU is the operator for that import, not a downstream buyer.

08Are wooden cremation urns treated the same way as coffins?

Yes. Urns are not named separately in the Combined Nomenclature and are generally classified under the same CN 4421 heading, so the scope answer follows the material in the same way it does for coffins.

References

Sources

  1. [1]Regulation (EU) 2023/1115 (EUDR), consolidated text with Annex I
  2. [2]Regulation (EU) No 995/2010 (EU Timber Regulation), consolidated text and Annex
  3. [3]Regulation (EU) 2025/2650 amending application dates and obligations
  4. [4]Commission Delegated Regulation (EU) 2026/2102 amending Annex I
  5. [5]Commission Implementing Regulation (EU) 2022/859 amending the Combined Nomenclature
Keep reading